72 11 092 Removing and installing/replacing rear left or right seat belts (coupe)

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove cover for seat belt.
Remove rear seat

Removing left or right inertia reel unit:

Release screw (1) on inertia reel unit (2).

For tightening torque refer to 72 11 21AZ in 72 11 SEAT BELTS .

Remove inertia reel unit (2).

Installation:

Pay attention to coding.

Fig 1: Screw And Inertia Reel Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (2).

For tightening torque refer to 72 11 22AZ in 72 11 SEAT BELTS .

Remove seat belt (1).

Installation:

Pin (3) determines the installation position and prevents the anchor fitting from turning.

Fig 2: Screw, Seat Belt And Pin

Courtesy of BMW OF NORTH AMERICA, INC.