72 14... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

For tightening torque refer to 52 24 03AZ in 24 REAR SEAT, NORMAL .

Fig 1: Top Tether Eyelets And Covers

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Ensure Top Tether eyelets (1) are in correct installation position.

It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Top Tether Eyelets And Head Restraints

Courtesy of BMW OF NORTH AMERICA, INC.