67 31 531 Removing and installing/replacing drive unit for backrest angle adjustment (coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove OUTER COVER
Unlock plug connections (2) and disconnect.
Release screws (1).
Remove drive for backrest angle adjustment from flange.
Installation:
Make sure drive shaft is correctly seated in gearbox.