66 20 565 Removing and installing/replacing front signal sensor (Park Distance Control)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Trim Panel For Pedal Assembly.

Disconnect plug connection (1).

Fig 1: Identifying Front Signal Sensor Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip signal sensor on both sides from fixture (1).

Installation:

Signal sensor (2) must snap audibly into retaining tabs.

Fig 2: Identifying Signal Sensor And Fixture

Courtesy of BMW OF NORTH AMERICA, INC.