64 11 378 Removing and installing/replacing heater/air conditioner operator unit (version with CCC/ASK)
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 335xi, 2012 BMW 328xi, and 2012 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- 00 9 340
IMPORTANT:
Read and comply with notes on Protection Against Electrostatic Damage (ESD Protection)!
NOTE:
C
ar C
ommunication C
omputer (CCC)
A udio S ystem K ontroller / Controller (ASK)
Necessary preliminary tasks:
NOTE:
Unclip the heater/air conditioner operator unit (2) by simultaneously
- levering out using special tool 00 9 340
- pulling on the relevant control button (3).
Fit special tool 00 9 340 on either side as illustrated.
Unclip heater/air conditioner operator unit (2) complete with trim (1) at fastening points (4) and pull back.
Unlock associated plug connections and disconnect.
Remove heater/air conditioner operator unit (2) complete with trim (1).
Fig 1: Trim, Heater/Air Conditioner Operator Unit, Control Button, Fastening Points And Special Tool (00 9 340)
Replacement:
Carefully unclip operator unit trim (1) at inner retaining points (2) only.
IMPORTANT:
Risk of damage to operator unit!
Carefully unclip operator unit trim (1) at outer retaining points (2) only.
Remove trim (1) from operator unit (3).
IMPORTANT:
Risk of damage to operator unit (3)!
Replacement:
Carry out programming/coding.