63 21 104 Replacing sealing frame for left or right rear light (on rear lid) (coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear light
Detach seal for rear light (1) completely from rear light (2).
Clean bonding surface and allow to dry.
Installation:
Make sure seal (1) is correctly bonded all round on rear light (2).