63 25 000 Removing and installing/replacing auxiliary brake light (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Unclip auxiliary brake light cover (1) at retaining points (3). Remove auxiliary brake light cover (1) in direction of arrow from roofliner (2).

Fig 1: Identifying Brake Light Cover, Retaining Points, Roofliner And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (3) and guides (2) of auxiliary brake light cover (1) must not be damaged.

Make sure cover for auxiliary brake light (1) is correctly seated.

Fig 2: Identifying Auxiliary Brake Light, Retaining Hooks And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unlock slide (2) in direction of arrow and remove auxiliary brake light (4) from rear window (3).

Installation:

Make sure auxiliary brake light (4) is correctly positioned on rear window (3).

Fig 3: Identifying Slide, Rear Window, Plug Connection, Brake Light And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.