61 71 015 Removing and installing/replacing a spray nozzle in windscreen washer system

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The jet nozzles of the windscreen washer system are preset at the factory and cannot be readjusted.

Necessary preliminary tasks:

Remove Lower Section Of Microfilter Housing

Press detent lug (1).

Detach unlocked plug housing (2) in direction of arrow.

Detach hose (3) from spray nozzle.

Fig 1: Identifying Plug Housing, Lug, Hose And Removal Direction

G04753467

Courtesy of BMW OF NORTH AMERICA, INC.

Release spray nozzle (1) in direction of arrow from cowl panel cover and remove.

Installation:

Make sure spray nozzle (1) is correctly seated.

Fig 2: Identifying Spray Nozzle And Removal Direction

G04753468

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of spray nozzle (4) must not be damaged or missing:

Fig 3: Identifying Spray Nozzle, Plug Connection, Hose Connection And Lugs

G04753469

Courtesy of BMW OF NORTH AMERICA, INC.