61 31 101 Removing and installing/replacing switch for longitudinal seat adjustment

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Raise release unit (1).

Unclip release trim (2) in direction of arrow and feed out of release unit (2).

Fig 1: Identifying Trim, Unit And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock retaining tab (2) in direction of arrow.

Remove switch for backrest width adjustment (3) in direction of arrow.

Fig 2: Identifying Plug Connection, Retaining Tab, Backrest Width Adjustment Switch And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.