61 13 050 Removing and installing or replacing fuse box in passenger compartment (built after 03/2007)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on HANDLING WIRING HARNESSES AND CABLES .

Necessary preliminary tasks:

Remove right GLOVE BOX WITH HOUSING
Remove JUNCTION BOX .

Disconnect plug connection (1).

Release wiring harness fastener (2) from fuse box interior (6).

Release screws (3).

IMPORTANT: Risk of damage!
Carefully fold fuse box interior (6) forwards, feeding battery positive lead (4) in direction of arrow out of fuse box interior holder (5).

Fig 1: Feeding Battery Positive Lead Out Of Fuse Box Interior Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect all plug connections (1) on reverse side of fuse box interior (3).

Remove fuse box interior (3).

Installation:

Battery positive lead (2) must not be damaged.

Make sure wiring harnesses are correctly laid and plug connections (1) are correctly engaged.

Fig 2: Identifying Plug Connections And Fuse Box Interior

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove fuses and relays.