61 35 080 Removing and installing (replacing) control unit for left or right seat adjustment (front seat) (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection)!

NOTE: To facilitate installation/removal of control unit, move seat upwards fully.

Unlock metal lug (1) towards front and remove control unit for seat adjustment (2) towards bottom.

Unlock and disconnect all associated plug connections.

Fig 1: Identifying Metal Lug, Control Unit And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure control unit for seat adjustment (1) is correctly seated in mounting (2).

Guides (3) and metal lug (4) must not be damaged.

Fig 2: Identifying Mounting, Guides, Control Unit And Metal Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out Vehicle Programming/Coding