52 26 311 Removing and installing/replacing lock for left or right rear seat backrest (through-loading system) (coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Unlock rear seat backrest and fold down.
NOTE:
In event of faulty unlocking, perform Emergency Opening.
Unclip Bowden cable from holders (1).
Unfasten screws (2).
For tightening torque refer to 8AZ in 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .
Pull lock (1) out of installation opening slightly and unclip Bowden cable (2).
Remove lock completely from installation opening.
Installation:
Catches (2) on lock must not be damaged.
Bowden cable must be correctly anchored in catches (2).
Installation:
Slide guide lug (1) of lock into opening (2).
Adjusting lock:
- Slacken screws
- Firmly push engaged backrest back
- Tighten down screws