52 26 020 Removing and installing/replacing both backrests for rear seat (coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Armrest Side Section
- Remove Rear Seat
NOTE:
A 2nd person is required to help remove and install the backrest.
Both backrests must be pulled out simultaneously from the center mount.
Left backrest:
- Release screw (1).
For tightening torque refer to 1AZ in 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .
- Fold backrest (2) forwards
- Pull backrest forwards and outwards out of center mount (3)
Right backrest:
- Release screw (1).
For tightening torque refer to 1AZ in 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .
- Fold backrest (2) forwards
- Pull backrest forwards and outwards out of center mount (3)