41 00... Gap dimensions, body

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Symmetry of the gaps between left and right sides of the vehicle has top priority.

The door gaps must not deviate between the front and rear gap by more than 1.0 mm.

Dimensions in mm

Fig 1: Identifying Gaps Dimension

G04752147

Courtesy of BMW OF NORTH AMERICA, INC.

Dimension (1) 0.8 ± 0.8 is reduced in the rearward direction of travel to 0 ± 0.8

Dimension (2) 1.5 ± 1.0 is reduced in the downward direction to 0 ± 1.5

Dimension (3) 0 ± 0.7 is reduced in the forward direction of travel to 2.5 ± 0.7

Fig 2: Identifying Gaps Dimension

G04752149

Courtesy of BMW OF NORTH AMERICA, INC.

Dimension (1) 4.5 ± 1.3 is reduced in the rearward direction of travel to 3.8 ± 1.1

Dimensions in mm

Fig 3: Identifying Gaps Dimension

G06179878

Courtesy of BMW OF NORTH AMERICA, INC.

Dimension (1) may have a differential from left to right of max. 1.1 mm.

Fig 4: Identifying Gaps Dimension

G06179879

Courtesy of BMW OF NORTH AMERICA, INC.

Dimension (1) may have a differential from front to rear of max. 1.1 mm.

Fig 5: Identifying Gaps Dimension

G06179880

Courtesy of BMW OF NORTH AMERICA, INC.

Dimension (1) may have a differential from left to right of max. 1.1 mm.

Fig 6: Identifying Gaps Dimension

G06179881

Courtesy of BMW OF NORTH AMERICA, INC.