51 46 050 Removing and installing/replacing top trim on rear apron (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Luggage Compartment Floor Trim (luggage compartment mat)

Detach seal (1) in covered area of trim (4).

Lever out protective caps (2) and release screws underneath.

Release expansion rivets (3).

Lever out trim (4) inwards/upwards.

Installation:

If necessary, replace damaged protective caps (2) and expander rivets (3).

Fig 1: Seal, Trim, Expansion Rivets And Protective Caps

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Lift off cover (1).

If necessary, feed out universal holders (2).

Fig 2: Universal Holders And Cover

Courtesy of BMW OF NORTH AMERICA, INC.