51 16... Removing and installing/replacing cover cap on left or right door mirror

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove MIRROR GLASS .

NOTE: Cover cap is secured without play by four multitooth catches (1) on retaining ring (2).

Secure cover cap against falling off.

Unlock multitooth catches (1) with a screwdriver.

Unclip cover cap forwards from retaining ring (2) and remove.

Fig 1: Identifying Multitooth Catches And Retaining Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Multitooth catches (1), catch (2) and guides (3) must not be damaged.

Fig 2: Identifying Multitooth Catches, Catch And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locators (1) on retaining ring (2) must not be damaged.

Fig 3: Identifying Retaining Ring

Courtesy of BMW OF NORTH AMERICA, INC.