51 16... Calibrating compass in inside mirror (up to 09/08)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It may be necessary to alter the magnetic deflection zone if the vehicle is more than two ranges away from the set deflection zone.
For numbers of magnetic deflection zone, refer to Owner's Handbook.
If may be necessary to calibrate the compass if:
For numbers of magnetic deflection zone, refer to Owner's Handbook.
If may be necessary to calibrate the compass if:
- vehicle battery has been clamped off for an extended period of time
- "C" appears in compass display
- there is no compass display
Setting magnetic deflection zone:
- Switch on ignition.
- Using a suitable tool (1), press push-button in area (A) of mirror (2) until a number appears in compass display (B)
- Press push-button repeatedly until number of desired zone appears
- Wait until direction display appears
- Magnetic deflection zone is now set
Calibrating compass:
- Switch on ignition.
- Using a suitable tool (1), press push-button in area (A) of mirror (2) until "C" appears in compass display (B)
- Drive vehicle 2 to 3 times in a circle at approx. 10 mph
- Calibration process is completed when direction display appears