51 16 204 Removing and installing/replacing rear cup holder

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Open cup holder (1) and remove mat insert (2).

Fig 1: Cup Holder And Mat Insert

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out hinges (1).

Close lid (2) slightly and feed out completely with both hinges (1) in direction of arrow.

Repeat procedure on lid (3).

Fig 2: Hinges, Lids And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Reach through openings and release catches (1).

Remove housing (2).

Installation:

Catches (1) on housing (2) must not be damaged.

Fig 3: Housing And Catches

Courtesy of BMW OF NORTH AMERICA, INC.