51 71... Removing and installing/replacing right spring support passage cover (convertible)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove right FRONT WHEEL

NOTE: Description is shown on the E82 by way of example. There may be differences in detail in the case of other models.

NOTE: Spring strut removed for purposes of clarity.
Release expander rivet (1) and remove cover (2).

Installation:

If necessary, replace expander rivet (1).

Note correct position of cover (2).

Fig 1: Identifying Expander Rivet And Cover

Courtesy of BMW OF NORTH AMERICA, INC.