51 71... Removing and installing/replacing left/right reinforcement cover (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release bolt (1) on front assembly underside protection.

Release screws (3) and nuts (4).

Remove reinforcement cover (2).

Installation:

Make sure reinforcement cover (2) is correctly seated.

Fig 1: Bolt, Screws, Nuts And Reinforcement Cover

Courtesy of BMW OF NORTH AMERICA, INC.