51 47 490 Removing and installing/replacing front underbody protection (AWD): Notes

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Illustration created using 330xi as an example. There may be differences in detail in the case of other vehicle models.

Remove screws (1 to 4).

Pull underbody protection (5) forward under bumper trim (6).