51 47 490 Removing and installing/replacing front underbody protection (AWD): Installation

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Centre underbody protection (5) and tighten down screws (1 to 4).

Fig 1: Identifying Underbody Protection On Bumper Trim With Screws

Courtesy of BMW OF NORTH AMERICA, INC.