41 11 141 Left Or Right Frame Side Member Cover Replacement (Partial Replacement Between A- And B-Pillars) (Coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Read contents of BODY, GENERAL .

Use only approved Spot-Welding Apparatus for repairs.

Following new body parts are required:

B-pillar with entrance

Fig 1: B-Pillar With Entrance

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Severance Cut Marks, Distances And Weld Joint Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Mark severance cuts (1) in accordance with specified measurements and cut.

Distance a = approx. 225 mm behind bore dia. 20 mm.

Distance b = approx. 250 mm before bore dia. 25 mm.

Open weld joints in areas (2).

Installation:

Weld reinforcement plates at all severance cuts (1).