41 11 028 LEFT ENGINE SUPPORT REPLACEMENT STRIPPING OPERATIONS (partial replacement before front axle)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Clamp off battery lead from negative terminal
- Remove bumper trim
- Remove bumper carrier
- Remove and install intake filter housing
- Remove front panel
- Remove and install left wheel arch cover (front section)
- Remove and install A/C system condenser
- Remove and install hydraulic steering cooling coil
- If necessary, remove and install intercooler
- Partially release left wiring harness