41 11 023 Front Engine Support With Left Wheel Arch Section Replacement Stripping Operations
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Disconnect battery negative lead
- Remove bumper trim
- Remove headlight
- Remove bumper carrier
- Remove front panel
- Remove radiator
- Remove A/C system condenser
- If necessary, remove intercooler
- If necessary, remove coolant expansion tank
- If necessary, remove air filter housing
- Remove hydraulic steering cooling coil
- Remove cowl panel cover
- Remove left wheel arch cover (front section)
- Remove left wheel arch cover (rear section)
- Remove left side panel
- Remove engine
- Remove and install complete front axle
- Remove tandem brake master cylinder
- Remove brake booster
- Release left wiring harness