41 34 041 Tail Panel Complete Replacement (Convertible)

Read contents of Body, General .

Use only approved spot-welding apparatus  for repairs.

For stripping and rigging operations, refer to information on BMW KSD CD (FR NUMBER 41 34 041).

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Following new body parts are required:

• (1) Rear trim
  Fig 1: Rear Trim

  Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Open brazed joints in areas (2).

Fig 2: Identifying Weld Joints Area And Brazed Joint Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Carry over the work step shown symmetrically to the other side of the vehicle.

Open weld joints in areas (1).

Fig 3: Identifying Weld Joint Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Preparation of new part: 

MAG weld in areas (1).

Fig 4: Identifying MAG Weld Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Slide in rear trim (1) from bottom upwards.

Fig 5: Identifying Rear Trim

Courtesy of BMW OF NORTH AMERICA, INC.