41 62 000 Rear Lid Removal And Installation (Coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Read contents of Body, general .
Necessary preliminary work:
- Remove Panel For Rear Lid
- Disconnect all plug and socket cable connections on rear lid.
Carry over the work step shown symmetrically to the other side of the vehicle.
Slacken screws (1)
Unfasten screws (2).
Tightening torque for rear lid to rear lid hinge M8 thread = 15 Nm..
Remove rear lid.
Installation:
Adjust Rear Lid .