Welding Steel Parts: Welding

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

During MAG welding, the weld gap must be kept as small as possible. The larger the weld gap, the lower will be the strength of the joint.
During spot-welding, the metal flanges to be joined must be placed as close together as possible without gaps.
The larger the gap, the lower will be the strength of the joint.

Minimum gap between welding spots 25 mm.