Installing Reinforcement Plate

Clean all bonding surfaces with cleaning agent R1.

Apply adhesive (1) to reinforcement plate bonding surface.

Carefully slide reinforcement plate half-way into body component (2).

Fig 1: Adhesive On Reinforcement Plate Bonding Surface

Courtesy of BMW OF NORTH AMERICA, INC.

Rivet reinforcement plate (1) up to half-way with blind rivets N3 (2).

Fig 2: Riveting Reinforcement Plate Up To Half-Way With Blind Rivets N3

Courtesy of BMW OF NORTH AMERICA, INC.

Apply adhesive (1) to reinforcement plate bonding surface.

Fig 3: Adhesive On Reinforcement Plate Bonding Surface

Courtesy of BMW OF NORTH AMERICA, INC.

Install new part (1) with straightening attachment or universal mount and rivet with blind rivets N3 (2).

After adhesive has hardened, flatten adhesive area and seal blind rivets.

Fig 4: Installing New Part Using Blind Rivets N3

Courtesy of BMW OF NORTH AMERICA, INC.