After Body Repairs To The Vehicle
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
All the folding roof components screwed/bolted to the body are precisely screwed/bolted to the vehicle at the factory by means of gauges. This affects above all the base plates and mounting brackets of the roof and rear end modules. To minimize extensive adjustment work after a body repair as much as possible, only remove those components which are screwed/bolted to a damaged body part.
- Gauge the BASE PLATESonly after a body repair to the cowl panel.