36 11 105 Removing and installing RDC (Tire Pressure Control) unit (coupe)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection).

Necessary preliminary tasks:

Remove right Luggage Compartment Trim Panel

Press sound-insulating material (1) to one side slightly.

Release screw (2) and carefully swing out control unit holder a little.

Fig 1: Sound-Insulating Material, Screw And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Press lug (2) in direction of arrow and pull out control unit (3) towards top.

Fig 2: Plug Connection, Lug, Control Unit And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out Programming/Coding