34 21 171 Removing and installing / replacing a brake carrier / brake guard at rear

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove expander lock
Remove wheel hub

Release screws (1).

Installation:

For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .

Release screws (2) and remove brake carrier (3).

Installation:

For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .

Fig 1: Brake Carrier And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary preliminary tasks:

Remove expander lock
Remove wheel hub

Release screws (1).

Installation:

For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .

Release screws (2) and remove brake carrier (3).

Installation:

For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .

Fig 1: Identifying Mounting Screws And Brake Carrier

Courtesy of BMW OF NORTH AMERICA, INC.