LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1173 (Brakes - Repair - E92/E93) >> Brake Lines >> 34 32 881 Replacing front left or right brake hoses

34 32 881 Replacing front left or right brake hoses

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

After completing work: Bleed braking system 

Press clutch pedal down to floor and secure with pedal support

NOTE: The pedal support may only be released when the brake lines are reconnected.

This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.

Fig 1: Clutch Pedal And Pedal Support
G04754178Courtesy of BMW OF NORTH AMERICA, INC.

Cars up to model year approx. 07/05: 

Pull brake hose out of holder (1).

Detach brake hose from brake line (2).

IMPORTANT: Grip brake hose at square head (3) to prevent connecting piece from turning in retaining bracket.

Installation: 

For tightening torque refer to 34 32 1AZ in 34 32 BRAKE LINES .

Detach brake hose from brake caliper (4).

Fig 2: Holder, Brake Line, Square Head And Brake Caliper
G04726591Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

For tightening torque refer to 34 32 2AZ in 34 32 BRAKE LINES .

Cars from model year approx. 07/05: 

Pull brake hose out of both holders (1).

IMPORTANT: Grip brake hose at square head (2) so that connecting piece cannot rotate in retaining bracket.

Detach brake hose from brake line (3).

Installation: 

For tightening torque refer to 34 32 1AZ in 34 32 BRAKE LINES .

Detach brake hose from brake caliper (4).

Installation: 

For tightening torque refer to 34 32 2AZ in 34 32 BRAKE LINES .

Fig 3: Brake Line, Brake Caliper Square Head And Holders
G04726660Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: First tighten brake hose on brake caliper.

Move wheels into straight-ahead position.

Insert brake hose in bracket and screw onto brake pipe.

Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.