33 33 001 Replacing left or right rear axle carrier compression strut
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe safety instructions for raising the vehicle
Driving without compression struts is not permitted!
Driving without compression struts is not permitted!
Risk of damage!
The rear axle carrier must be supported at the front is both compression struts have to be replaced!
Necessary preliminary tasks:
- Remove UNDERBODY COVER
Release screws (1).
Installation:
Replace screws.
Tightening torque: see 2AZ in 33 33 REAR AXLE SUSPENSION .
Release screw (3) and remove compression strut (2).
Installation:
Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .
Tightening torque: 108 Nm