32 00... Moving vehicle into design position
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Move vehicle into normal position
- Version with air spring system:
- Remove ignition key
- Pull fuse for air supply unit control unit
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to Technical Data
).
Measure ride-level height of vehicle