31 35 005 Removing and installing/replacing push rod (anti-roll bar link) for left/right anti-roll bar
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1) and remove bracket for brake hose.
Release nut (3) and remove stabilizer link (2).
Installation:
Replace self-locking nuts.
Tightening torque, see 2AZ in 31 35 STABILIZER BAR .