Version 3:
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Release nut and disengage cable (1).
Installation:
Unfasten nut.
Adjust cable by means of holder (2) until spacing A = 1 mm is obtained
Tighten nut.
Release screws (1).
For tightening torque refer to 25 16 3AZ in 25 16 SHIFT CONSOLE - AUTOMATIC TRANSMISSION .
Disconnect plug connections (2).
Remove cables from holders.
Lift shift tower out of center console.