24 00 018 Adjusting selector lever (GA6L45R)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Check cable for ease of movement.

Move selector lever to "P" position.

Grip clamping sleeve (1).

Slacken nut (2).

Press selector lever (3) forwards into park position. Press cable (4) in direction of arrow and release again.

Grip clamping sleeve (1).

Tighten down nut (2).

For tightening torque refer to 25 16 2AZ in 25 16 SHIFT CONSOLE - AUTOMATIC TRANSMISSION .

Fig 1: Clamping Sleeve, Nut, Selector Lever, Cable And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Move selector lever to "P" position.

Check whether parking gear is engaged by turning propeller shaft.