22 32 001 Replacing rubber mount for transmission mounting (automatic)
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear underbody protection.
- Support transmission with lifter.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Remove rubber mount from transmission cross-member.
For tightening torque refer to 24 71 1AZ/2AZ in 24 71 TRANSMISSION MOUNTS .
NOTE:
Illustration similar.