22 11 110 Replacing left engine support arm (N51/N52/N52K/N53)
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove underbody protection at front and rear
- Secure engine in Installation Position
- Remove Intake Filter Housing
- Remove Reinforcement Strut (E90/91/92 only)
- Remove V-strut (E93 only)
Release grounding strap from engine support arm.
Release screw (1).
Release corrugated tube (2) from retainer.
Release screws (3).
Remove engine support arm.
Installation:
Aluminium screws/bolts must be replaced.
For tightening torque refer to 22 11 3AZ in 22 11 ENGINE SUSPENSION .