22 11 001 Replacing right engine mount (N51/N52/N52K/N53)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure engine in Installation Position .
Remove underbody protection.
Remove right V-strut (E93 only).

Release screws (1) and remove engine mount.

For tightening torque refer to 22 11 1AZ in 22 11 ENGINE SUSPENSION .

Fig 1: Identifying Engine Mount Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Rubber section (1) of engine mount must point to middle of vehicle.

Engine mount designations:

Right engine mount

Even component number

Left engine mount

Odd component number

Fig 2: Identifying Rubber Section Of Engine Mount
Courtesy of BMW OF NORTH AMERICA, INC.