16 12 010 Removing and installing/replacing carbon canister (DMTL)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove cover from rear right bumper.

Disconnect plug connection (1).

Unlock quick-release fasteners (2) and disconnect vent lines.

Release screws (3) and remove carbon canister (4).

Installation:

For tightening torque refer to 16 13 1AZ in 16 13 TANK VENTILATION .

Fig 1: Carbon Canister, Quick-Release Fasteners, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lug (1) must be correctly seated in guide (2).

Fig 2: Identifying Lug And Guide

Courtesy of BMW OF NORTH AMERICA, INC.