Resetting TPM Without iDrive
WARNING: This page does not describe the selected car, but rather 1209 other vehicles, including the 2025 BMW iX, 2025 BMW i7, 2025 BMW i5, 2025 BMW i4, and 2025 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
- Set the tire pressure of all wheels to specification.
- Start engine.
- Move turn signal lever up or down until TPM warning symbol and RESET appears. See Fig 1.
- Press BC button on end of turn signal lever to confirm selection.
- Press and hold BC button for approximately 5 seconds until a CHECK/TICK appears after RESET.
- Drive vehicle. Initialization is automatically completed during the drive, without any feedback issued.