LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Maintenance Reminder Light (Reset Procedures)) >> Tire Pressure Monitor System Reminder >> TPMS Reminder Reset - Procedure 04

TPMS Reminder Reset - Procedure 04

WARNING: This page does not describe the selected car, but rather 1209 other vehicles, including the 2025 BMW iX, 2025 BMW i7, 2025 BMW i5, 2025 BMW i4, and 2025 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The initialization finishes during driving, which can be interrupted at any time. When driving resumes, the initialization is continued automatically.
  1. Set the tire pressure of all wheels to specification.
  2. Press "MENU" button to open start menu.
  3. Open the i-menu of the Control Center.
  4. Select "SETTINGS" and press the controller.
  5. Select "VEHICLE" and press the controller. See Fig 1.
  6. Select "TIRES: TPM" and press controller.
  7. Start engine, but do not start driving.
  8. Select "RESET" and press the controller.
  9. Select "YES" and press the controller.
  10. Drive vehicle. The message "RESETTING TPM...." will be displayed. Initialization is automatically completed during the drive. When initialization is complete, "STATUS: TPM ACTIVE" message will be displayed.
    11. Fig 1: Identifying TPM System Reinitialization Messages
    G00251686Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals