TPMS Reminder Reset - Procedure 02

WARNING: This page does not describe the selected car, but rather 1209 other vehicles, including the 2025 BMW iX, 2025 BMW i7, 2025 BMW i5, 2025 BMW i4, and 2025 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The initialization finishes during driving, which can be interrupted at any time. When driving resumes, the initialization is continued automatically.

Set the tire pressure of all wheels to specification.
Start engine, but do not start driving.
On Control Center, select "RPA" from the "SETTINGS" menu and confirm selection. The initialization menu will appear. See Fig 1.
Select "SET" and confirm selection.
Drive vehicle. The message "FTM IS BEING INITIALIZED" will be displayed. See Fig 2.
NOTE: It takes at least 10 minutes before the TPM system can detect and report a flat tire.
Select counterclockwise left arrow button and confirm to exit from menu.

Fig 1: Identifying TPM System Reinitialization Messages (1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Identifying TPM System Reinitialization Messages (2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.