LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Maintenance Reminder Light (Reset Procedures)) >> Brake Pad Replacement Reminder >> Brake Pad Replacement Reminder Reset - Procedure 03 >> CBS Reset With Diagnosis System

CBS Reset With Diagnosis System

WARNING: This page does not describe the selected car, but rather 1209 other vehicles, including the 2025 BMW iX, 2025 BMW i7, 2025 BMW i5, 2025 BMW i4, and 2025 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: To be able to check and/or correct the car's on-board date properly, the diagnosis system requires the correctly set tester system date! The jobs may only be reset after the service measure has been completed.
NOTE: The brake pads can only be reset with a new brake pad wear sensor.

The CBS jobs can be reset via the diagnosis system on the following path:

  1. Start diagnosis system.
  2. Carry out vehicle identification.
  3. Function selection.
  4. Service functions.
  5. Maintenance.
  6. CBS reset.