CBS Reset In The Car
WARNING: This page does not describe the selected car, but rather 1209 other vehicles, including the 2025 BMW iX, 2025 BMW i7, 2025 BMW i5, 2025 BMW i4, and 2025 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A reset is only possible in the car if:
- There is no Check Control message
- Availability of the service job is under 90%
- On-board date must be correctly set
NOTE:
Resetting of a service job must always be carried out after a maintenance measure has been completed. The resetting process is interrupted if the time is exceeded or if a terminal is changed.
NOTE:
Service operations can be reset at the instrument panel.
- Switch the ignition ON.
- Press the trip distance recorder reset button (1) for approx. 10 seconds until the first service job appears in the display (2). See Fig 1.
- Bring up the next item by briefly pressing the reset button again. Select the desired service job.NOTE: If a reset is possible, this is displayed in the instrument panel as "Reset executable".
- Confirm text message "Execute reset?" by pressing the button for 3 seconds again.
- The status of the reset is indicated in the display by a progress bar and in text as "Reset running".
- The reset is confirmed after completion as "Reset successful".