11 00 Removing and installing/replacing ignition coil cover (N52K)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Microfilter Housing

Release screws (arrow).

For tightening torque refer to 11 12 6AZ in 11 12 CYLINDER HEAD WITH COVER (1AZ-12AZ) [N52K] .

Remove ignition coil cover (1) towards top.

NOTE: For purposes of improved clarity, picture and descriptions show wiring harness and tension strut removed.

Fig 1: Ignition Coil Cover And Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.