11 12 101 Replacing cylinder head gasket (N52K)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 4 430
11 4 470

IMPORTANT: Aluminium-magnesium materials.

No steel screws/bolts may be used due to the threat of electrochemical corrosion.

A magnesium crankcase requires aluminium screws/bolts exclusively.

Aluminium screws/bolts must be replaced each time they are released .

Aluminium screws/bolts are permitted with and without color coding (blue).

For reliable identification:

Aluminium screws/bolts are not magnetic .

Jointing torque and angle of rotation must be observed without fail (risk of damage).

Necessary preliminary tasks:

Remove Cylinder Head .

Insert special tool 11 4 430 into bores.

Remove cylinder head seal.

IMPORTANT: Check marking (1) on cylinder head gasket (B25 or B30).

B = gasoline engine
30 = displacement (3 liters)

Do not mix them up as this will cause engine damage.

Fig 1: Special Tool (11 4 430) And Cylinder Head Gasket Marking

G04751049

Courtesy of BMW OF NORTH AMERICA, INC.

Remove remnants of oil and dirt from pocket holes (1).

IMPORTANT: Work on sealing face on engine block and on cylinder head with special tool 11 4 470 only.

Do not use any metal-cutting tools.

Fig 2: Cylinder Head Pocket Holes

G04751050

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Rubber coating (2) on cylinder head gasket (3) must not under any circumstances be damaged (electrochemical corrosion).

Cylinder head gasket (3) is a sheet-metal gasket.

Fig 3: Cylinder Head Gasket And Rubber Coating

G04751051

Courtesy of BMW OF NORTH AMERICA, INC.

Check adapter sleeves (1) for damage and firm seating.

Place cylinder head gasket (2) in direction of arrow on engine block.

Fig 4: Adapter Sleeves And Cylinder Head Gasket

G04751052

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check cylinder head for Deviation From Flatness .

Check cylinder head for Water Leaks .

Assemble engine.