33 21 Output Shaft

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

OUTPUT SHAFT - TIGHTENING TORQUE SPECIFICATION

	Type	Thread	Tightening specification	Measure
1AZ Output shaft to rear differential drive flange (Torx screw with ribbed teeth)	E81, E87, E90, E91, E92, E93	M8	Replace screws	52 Nm
	E81, E87, E90, E91, E92, E93	M10	Replace screws	80 Nm